Comments on: WinSIXAXIS 1.1.0.192 is out http://www.iraqigeek.com/2008/05/22/winsixaxis-110192-is-out/ My ranting space on the internet Wed, 07 Jan 2009 06:11:07 +0000 http://wordpress.org/?v=2.7 hourly 1 By: aero528 http://www.iraqigeek.com/2008/05/22/winsixaxis-110192-is-out/comment-page-1/#comment-2804 aero528 Fri, 20 Jun 2008 20:49:02 +0000 http://www.iraqigeek.com/?p=91#comment-2804 Me either. The only qualm I have with this driver is the lack of trigger proportionality. Is there any way I can do this myself? Me either. The only qualm I have with this driver is the lack of trigger proportionality. Is there any way I can do this myself?

]]> By: mitoman http://www.iraqigeek.com/2008/05/22/winsixaxis-110192-is-out/comment-page-1/#comment-2795 mitoman Thu, 12 Jun 2008 02:17:04 +0000 http://www.iraqigeek.com/?p=91#comment-2795 I dont know what to say... I dont know what to say…

]]> By: aero528 http://www.iraqigeek.com/2008/05/22/winsixaxis-110192-is-out/comment-page-1/#comment-2791 aero528 Wed, 11 Jun 2008 03:11:40 +0000 http://www.iraqigeek.com/?p=91#comment-2791 I don't know exactly where to comment on this, so I guess this is as good as any. I couldn't find you contact email, otherwise I would have just emailed it to you. Let me just start off by saying, this is an amazing program/driver to get the sixaxis working for the PC. I have used both the ps3sixaxis_en and the Japanese driver, both of which worked, but not with the motion. I had some weird and unexpected problems. What happened to me was every time I opened winsixaxis(or started the computer, which did the same thing) I came up with this error...."Access violation at address 00401EE1 in module 'WinSIXAIXS.exe'. Read of address 00000102" And yes, it really does say WinSIXAIXS.exe(spelled wrong). Well, I couldn't figure it out. It always just froze that window, and the program stopped responding. I could still do everything else on my computer, though. When I Ctrl+Alt+Del to see, in my processes list I saw that winsixaxis.exe was running, but I could not end the process. The other thing I experienced was that my computer never shut down(had to hard reset it). I assume this is because windows for some reason could not close winsixaxis.exe. Well, what I ended up doing, is following the instructions on your homepage for "Those who's program freezes". This still didn't fix the problem. Reboot. So the next thing I did was to unistall libusb-win32. Reboot. Start up WinSIXAXIS again, get the same message. This time, though I can click ok, and it proceeds to the program. I calibrate, and it works!! When I run the libusb test it comes up with this.... DLL version: 0.1.12.1 Driver version: 0.1.12.1 + some extra stuff. So, While I dont have libusb installed(not in my programs list, nor anywhere I can find), it is still coming up on the test. Sorry if that is long and drawn out, but thats pretty much the only way I can explain it. I hope this might possibly help someone else with a similar problem. The error message still comes up, but everything runs fine. Tested it with some games, and it works great. Also when I go to Control Panel>Game Controllers, I only have the parallel port joystick 1 there, no other items. Any ideas on why? Btw, is it possible to map the triggers to a proportional control(like they would be if the controller was being used on the PS3)? Again, awesome stuff, just hope I can help with this information somehow. I don’t know exactly where to comment on this, so I guess this is as good as any. I couldn’t find you contact email, otherwise I would have just emailed it to you. Let me just start off by saying, this is an amazing program/driver to get the sixaxis working for the PC. I have used both the ps3sixaxis_en and the Japanese driver, both of which worked, but not with the motion. I had some weird and unexpected problems. What happened to me was every time I opened winsixaxis(or started the computer, which did the same thing) I came up with this error….”Access violation at address 00401EE1 in module ‘WinSIXAIXS.exe’. Read of address 00000102″ And yes, it really does say WinSIXAIXS.exe(spelled wrong). Well, I couldn’t figure it out. It always just froze that window, and the program stopped responding. I could still do everything else on my computer, though. When I Ctrl+Alt+Del to see, in my processes list I saw that winsixaxis.exe was running, but I could not end the process. The other thing I experienced was that my computer never shut down(had to hard reset it). I assume this is because windows for some reason could not close winsixaxis.exe. Well, what I ended up doing, is following the instructions on your homepage for “Those who’s program freezes”. This still didn’t fix the problem. Reboot. So the next thing I did was to unistall libusb-win32. Reboot. Start up WinSIXAXIS again, get the same message. This time, though I can click ok, and it proceeds to the program. I calibrate, and it works!! When I run the libusb test it comes up with this….

DLL version: 0.1.12.1
Driver version: 0.1.12.1

+ some extra stuff. So, While I dont have libusb installed(not in my programs list, nor anywhere I can find), it is still coming up on the test. Sorry if that is long and drawn out, but thats pretty much the only way I can explain it. I hope this might possibly help someone else with a similar problem. The error message still comes up, but everything runs fine. Tested it with some games, and it works great. Also when I go to Control Panel>Game Controllers, I only have the parallel port joystick 1 there, no other items. Any ideas on why? Btw, is it possible to map the triggers to a proportional control(like they would be if the controller was being used on the PS3)? Again, awesome stuff, just hope I can help with this information somehow.

]]>